*** 11/20/20 SITE IS BACK UP ***

All things related to the Centroid Acorn CNC Controller

Moderator: cnckeith

Post Reply
martyscncgarage
Posts: 6676
Joined: Tue Mar 28, 2017 12:01 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: No
MPU11 & GPIO4D -w/ 3rd Party Drives: No
DC3IOB: No
CNC12: Yes
CNC11: Yes
CPU10 or CPU7: Yes
CNC Control System Serial Number: none
Location: Mesa, AZ

*** 11/20/20 SITE IS BACK UP ***

Post by martyscncgarage »

CNCKEITH states the site is back up.
I did some basic testing and checking, everything appears to be working again.
IF any of you spot something get an error, please take a screen shot and reply with it to this message. If after a week or so, no responses, I will remove this post.
Thank you!
Marty
Reminder, for support please follow this post: viewtopic.php?f=20&t=383
We can't "SEE" what you see...
Mesa, AZ
zz0122
Posts: 30
Joined: Wed Sep 30, 2020 11:23 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
MPU11 & GPIO4D -w/ 3rd Party Drives: No
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
CNC Control System Serial Number: none

Re: *** 11/20/20 SITE IS BACK UP ***

Post by zz0122 »

I guess this just for ecstatic, the centroid icon does not come out like the main centroid we page
Screenshot 2020-11-21 19.23.59.png
martyscncgarage
Posts: 6676
Joined: Tue Mar 28, 2017 12:01 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: No
MPU11 & GPIO4D -w/ 3rd Party Drives: No
DC3IOB: No
CNC12: Yes
CNC11: Yes
CPU10 or CPU7: Yes
CNC Control System Serial Number: none
Location: Mesa, AZ

Re: *** 11/20/20 SITE IS BACK UP ***

Post by martyscncgarage »

zz0122 wrote: Sat Nov 21, 2020 11:27 pm I guess this just for ecstatic, the centroid icon does not come out like the main centroid we page

Screenshot 2020-11-21 19.23.59.png
Thanks, I noticed the same thing, same icon as you got.
Marty
Reminder, for support please follow this post: viewtopic.php?f=20&t=383
We can't "SEE" what you see...
Mesa, AZ
martyscncgarage
Posts: 6676
Joined: Tue Mar 28, 2017 12:01 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: No
MPU11 & GPIO4D -w/ 3rd Party Drives: No
DC3IOB: No
CNC12: Yes
CNC11: Yes
CPU10 or CPU7: Yes
CNC Control System Serial Number: none
Location: Mesa, AZ

Re: *** 11/20/20 SITE IS BACK UP ***

Post by martyscncgarage »

11/24/20: Please note, if you subscribe to a topic, it has been noted that notification emails may not be sent out.
It is being worked on.
Reminder, for support please follow this post: viewtopic.php?f=20&t=383
We can't "SEE" what you see...
Mesa, AZ
cnckeith
Posts: 2930
Joined: Wed Mar 03, 2010 4:23 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: Yes
MPU11 & GPIO4D -w/ 3rd Party Drives: Yes
DC3IOB: Yes
CNC11: Yes
CPU10 or CPU7: Yes
CNC Control System Serial Number: none
Contact:

Re: *** 11/20/20 SITE IS BACK UP ***

Post by cnckeith »

icon is fixed.. still working on notification issue.
When requesting support READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043

Please ALWAYS post a FRESH report. To make a report: https://www.youtube.com/watch?v=Ecvg0VJp1oQ.

(We pride ourselves on providing timely solid technical support but, without good information we may not be able to help and/or reply until such information is posted.)
Post Reply