DYN4 Alarm

All things related to the Centroid Acorn CNC Controller

Moderator: cnckeith

martyscncgarage
Posts: 9912
Joined: Tue Mar 28, 2017 12:01 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC12: Yes
CNC11: Yes
CPU10 or CPU7: Yes
Location: Mesa, AZ

Re: DYN4 Alarm

Post by martyscncgarage »

Obsidian wrote: Fri Nov 20, 2020 9:02 pm I was feeding 240v into a contactor which had 240v going to the drive R/S and a 240v going through the line filters to the logic. I talked to a DMM rep about the issue and he was stumped. I went ahead and just wired it 120v to the logic and 240v to the R/S. There is no voltage increase at the logic side now.
That is quite bizzarre. Did it solve your problem?
Reminder, for support please follow this post: viewtopic.php?f=20&t=383
We can't "SEE" what you see...
Mesa, AZ
Obsidian
Posts: 48
Joined: Tue Dec 03, 2019 10:40 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: 780473A92571-0930192501
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No

Re: DYN4 Alarm

Post by Obsidian »

It solved this problem, another now of course. Since I updated to 4.50, something happened with the VCP. My Z+ jog key is now bound to A- jog somehow and I'm trying to find the problem in the plc.
martyscncgarage
Posts: 9912
Joined: Tue Mar 28, 2017 12:01 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC12: Yes
CNC11: Yes
CPU10 or CPU7: Yes
Location: Mesa, AZ

Re: DYN4 Alarm

Post by martyscncgarage »

Obsidian wrote: Fri Nov 20, 2020 9:33 pm It solved this problem, another now of course. Since I updated to 4.50, something happened with the VCP. My Z+ jog key is now bound to A- jog somehow and I'm trying to find the problem in the plc.
Its not the PLC.
Its the new VCP 2.0
Just change the button.

Both the VCP 2.0 Manual and Video are in this post:
viewtopic.php?f=61&t=4685


Marty
Reminder, for support please follow this post: viewtopic.php?f=20&t=383
We can't "SEE" what you see...
Mesa, AZ
Obsidian
Posts: 48
Joined: Tue Dec 03, 2019 10:40 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: 780473A92571-0930192501
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No

Re: DYN4 Alarm

Post by Obsidian »

Yep the skin # was wrong for Z+ and X+.
Post Reply