Hi guys
is it possible to connect such encoders to the acorn board and move the table manually on a mill?
Best regards: Christian Wahl
Roundss handwheel enconders
Moderator: cnckeith
-
- Posts: 9
- Joined: Sun Apr 12, 2020 5:34 am
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: 0479B7ABD46B-0319203088
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
Roundss handwheel enconders
Bridgeport J-head retrofit
Just for fun
Just for fun
-
- Posts: 3131
- Joined: Tue Mar 22, 2016 10:03 am
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: Yes
- CNC Control System Serial Number: 100505
100327
102696
103432
7804732B977B-0624192192 - DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: Boston, MA
- Contact:
Re: Roundss handwheel enconders
Nope. Acorn only has a single encoder port for the spindle. You can use the wireless MPG with the Acorn, but if you want dual handwheels you'll need to use either the Oak or AllIn1DC.
Cheers,
Tom
Confidence is the feeling you have before you fully understand the situation.
I have CDO. It's like OCD, but the letters are where they should be.
Tom
Confidence is the feeling you have before you fully understand the situation.
I have CDO. It's like OCD, but the letters are where they should be.
-
- Posts: 9915
- Joined: Tue Mar 28, 2017 12:01 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Location: Mesa, AZ
Re: Roundss handwheel enconders
Reminder, for support please follow this post: viewtopic.php?f=20&t=383
We can't "SEE" what you see...
Mesa, AZ
We can't "SEE" what you see...
Mesa, AZ