I can't find a Knurling Tool in the Tool Library. My goal is to turn a part, change to the Knurling tool and then knurl a portion of that part.
I see an option for CUSTOM but it leaves the name as Custom and may not work for a knurling tool.
Is there such a tool in the library that I can't see or what are folks doing to add one? I can't be the only one..
Tool Library - Knurling Tool
Moderator: cnckeith
-
- Posts: 21
- Joined: Thu Sep 10, 2020 10:19 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
-
- Posts: 9914
- Joined: Tue Mar 28, 2017 12:01 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Location: Mesa, AZ
Re: Tool Library - Knurling Tool
Reminder, for support please follow this post: viewtopic.php?f=20&t=383
We can't "SEE" what you see...
Mesa, AZ
We can't "SEE" what you see...
Mesa, AZ
-
- Posts: 9914
- Joined: Tue Mar 28, 2017 12:01 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Location: Mesa, AZ
Re: Tool Library - Knurling Tool
Dana, Centroid's Lathe specialist and Research, Development & Manufacturing Engineer suggests:
He can use Custom but can not change the name or describe it as an OD turning tool. It would be set up as an OD tool with nose vector 8.
He can use Custom but can not change the name or describe it as an OD turning tool. It would be set up as an OD tool with nose vector 8.
Reminder, for support please follow this post: viewtopic.php?f=20&t=383
We can't "SEE" what you see...
Mesa, AZ
We can't "SEE" what you see...
Mesa, AZ