Hey Swissi,
I have been using probe app v2 and it has been running great so far. One question for you though, is it possible to change the default location on the screen for the pop-up window? I am using a 720p screen and even though I know I'm supposed to be using a 1080p screen everything on the cnc12 side has worked flawlessly. The probe app pop up window defaults to about half of the window off of the bottom of my screen. I can reposition it manually but this gets a little tiresome. Hopefully there is an easy change I can make for default screen location? Any help or insight would be greatly appreciated!
ProbeApp V2: The ultimate solution for Tool Height Offsets
Moderator: cnckeith
-
- Posts: 573
- Joined: Wed Aug 29, 2018 11:15 am
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: 985DADEB24D5-0309180716
- DC3IOB: No
- CNC11: No
- CPU10 or CPU7: No
Re: ProbeApp V2: The ultimate solution for Tool Height Offsets
Just press the "Configuration" button on the main screen of the ProbeApp. Move the configuration window to the default screen position you want and then press the Button "Get current Position from this Window". Done.ridekp wrote: ↑Wed May 05, 2021 12:54 pm Hey Swissi,
I have been using probe app v2 and it has been running great so far. One question for you though, is it possible to change the default location on the screen for the pop-up window? I am using a 720p screen and even though I know I'm supposed to be using a 1080p screen everything on the cnc12 side has worked flawlessly. The probe app pop up window defaults to about half of the window off of the bottom of my screen. I can reposition it manually but this gets a little tiresome. Hopefully there is an easy change I can make for default screen location? Any help or insight would be greatly appreciated!
-swissi
If you are using Fusion 360, check out my CNC12 specific Post Processor
If you are using a Touch Probe, Tool Touch Off Device or a Triple Corner Finder Plate, check out my ProbeApp
Contact me at swissi2000@gmail.com
If you are using a Touch Probe, Tool Touch Off Device or a Triple Corner Finder Plate, check out my ProbeApp
Contact me at swissi2000@gmail.com
-
- Posts: 19
- Joined: Tue Apr 21, 2020 10:26 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
Re: ProbeApp V2: The ultimate solution for Tool Height Offsets
Welp, can't believe I missed that but it worked perfectly. Thanks!!
-
- Posts: 2
- Joined: Thu May 13, 2021 3:33 pm
- Acorn CNC Controller: No
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Contact:
Re: ProbeApp V2: The ultimate solution for Tool Height Offsets
Thank you.
The Best CNC Machining and Milling Services (CNC Service)https://cncmachinebuy.com/the-best-cnc- ... c-service/
-
- Posts: 29
- Joined: Thu Feb 11, 2021 9:16 pm
- Acorn CNC Controller: No
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: No
- CNC11: No
- CPU10 or CPU7: No
Re: ProbeApp V2: The ultimate solution for Tool Height Offsets
I'm sold. How do I buy, and how much?!
-
- Posts: 374
- Joined: Tue Dec 11, 2018 4:03 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: F045DA80C8B8-0905181172
E415F6F70BC3-0318203049
98F07B91FC6B-0123236802 - DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: UK
Re: ProbeApp V2: The ultimate solution for Tool Height Offsets
Send an email to Swissi as per his post above. Usually donate ware where you donate what it's worth to you. Really can't get fairer than that
Hope this helps
Nigel
"You can lead a horse to water but you cannot force it to drink"
Nigel
"You can lead a horse to water but you cannot force it to drink"