ProbeApp V2: The ultimate solution for Tool Height Offsets

[ridekp]

Hey Swissi,

I have been using probe app v2 and it has been running great so far. One question for you though, is it possible to change the default location on the screen for the pop-up window? I am using a 720p screen and even though I know I'm supposed to be using a 1080p screen everything on the cnc12 side has worked flawlessly. The probe app pop up window defaults to about half of the window off of the bottom of my screen. I can reposition it manually but this gets a little tiresome. Hopefully there is an easy change I can make for default screen location? Any help or insight would be greatly appreciated!

[swissi]

Hey Swissi,

I have been using probe app v2 and it has been running great so far. One question for you though, is it possible to change the default location on the screen for the pop-up window? I am using a 720p screen and even though I know I'm supposed to be using a 1080p screen everything on the cnc12 side has worked flawlessly. The probe app pop up window defaults to about half of the window off of the bottom of my screen. I can reposition it manually but this gets a little tiresome. Hopefully there is an easy change I can make for default screen location? Any help or insight would be greatly appreciated!

Just press the "Configuration" button on the main screen of the ProbeApp. Move the configuration window to the default screen position you want and then press the Button "Get current Position from this Window". Done.

-swissi

[ridekp]

Welp, can't believe I missed that but it worked perfectly. Thanks!!

[cncbuy]

Thank you.

[TaylorPilot]

I'm sold. How do I buy, and how much?!

[Nigelo]

Send an email to Swissi as per his post above. Usually donate ware where you donate what it's worth to you. Really can't get fairer than that