ProbeApp V2: The ultimate solution for Tool Height Offsets

All things related to the Centroid Acorn CNC Controller

Moderator: cnckeith

ChrisAttebery
Posts: 78
Joined: Mon Dec 07, 2020 2:20 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
MPU11 & GPIO4D -w/ 3rd Party Drives: No
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
CNC Control System Serial Number: 4031
Location: Gilroy, CA
Contact:

Re: ProbeApp V2: The ultimate solution for Tool Height Offsets

Post by ChrisAttebery »

Great minds think alike. I marked my probe to line up with the spindle too.
NovaStar
Posts: 5
Joined: Mon Jul 06, 2020 6:21 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
MPU11 & GPIO4D -w/ 3rd Party Drives: No
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
CNC Control System Serial Number: C143145

Re: ProbeApp V2: The ultimate solution for Tool Height Offsets

Post by NovaStar »

Cost of this App ??
Upnorth
Posts: 28
Joined: Wed Apr 01, 2020 8:23 am
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
MPU11 & GPIO4D -w/ 3rd Party Drives: No
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
CNC Control System Serial Number: 1702

Re: ProbeApp V2: The ultimate solution for Tool Height Offsets

Post by Upnorth »

Cost of the app is whatever it's worth to you. There is no fixed price you just pay the price you think is fair. I highly recommend this app.
mobilemcclintic
Posts: 2
Joined: Sun Jul 12, 2020 6:24 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
MPU11 & GPIO4D -w/ 3rd Party Drives: No
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
CNC Control System Serial Number: none

Re: ProbeApp V2: The ultimate solution for Tool Height Offsets

Post by mobilemcclintic »

Swissi,
I'm having trouble getting z to set to 0 correctly on a corner plate. It I'm not sure where I'm going wrong. If after probing xyz, it goes to x0y0 great. If I tell it to go to Z0 it goes approximately 1/4" or 6 mm lower than the thickness of the corner plate. Any ideas?
mobilemcclintic
Posts: 2
Joined: Sun Jul 12, 2020 6:24 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
MPU11 & GPIO4D -w/ 3rd Party Drives: No
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
CNC Control System Serial Number: none

Re: ProbeApp V2: The ultimate solution for Tool Height Offsets

Post by mobilemcclintic »

Sorted, my distance/turn was off on my z-axis. I knew it was something simple.
knastenrad
Posts: 46
Joined: Fri Jul 05, 2019 3:41 am
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
MPU11 & GPIO4D -w/ 3rd Party Drives: No
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
CNC Control System Serial Number: none

Re: ProbeApp V2: The ultimate solution for Tool Height Offsets

Post by knastenrad »

Is there any option to probe 2 holes/bosses and use the centerline to update CSR?
swissi
Posts: 471
Joined: Wed Aug 29, 2018 11:15 am
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
MPU11 & GPIO4D -w/ 3rd Party Drives: No
DC3IOB: No
CNC11: No
CPU10 or CPU7: No
CNC Control System Serial Number: 985DADEB24D5-0309180716

Re: ProbeApp V2: The ultimate solution for Tool Height Offsets

Post by swissi »

knastenrad wrote: Mon Mar 15, 2021 7:15 am Is there any option to probe 2 holes/bosses and use the centerline to update CSR?
The current version does not have this option. I do have some ideas of an interactive probing cycle generator that will allow to stack multiple probing moves together to make such options possible. No promises made and definitely no release date yet :D

-swissi
If you are using Fusion 360, check out my CNC12 specific Post Processor
If you are using a Touch Probe, Tool Touch Off Device or a Triple Corner Finder Plate, check out my ProbeApp

Contact me at swissi2000@gmail.com
knastenrad
Posts: 46
Joined: Fri Jul 05, 2019 3:41 am
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
MPU11 & GPIO4D -w/ 3rd Party Drives: No
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
CNC Control System Serial Number: none

Re: ProbeApp V2: The ultimate solution for Tool Height Offsets

Post by knastenrad »

great. keep up the good work!
Post Reply