Wondering if there is a list of current unresolved CNC12 ver 4.5 bugs, including what the bug is, what it impacts (especially regarding probing) and when it might be resolved. I've searched around in the forum and found reference to various issues here and there, but I can't necessarily remember them or if I've missed one. If I missed such a summary, please point me to where it is.
I think such a list would be a help to most of us
Thanks ahead of time
CNC12 ver 4.5 "bugs" summary
Moderator: cnckeith
-
- Posts: 573
- Joined: Wed Aug 29, 2018 11:15 am
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: 985DADEB24D5-0309180716
- DC3IOB: No
- CNC11: No
- CPU10 or CPU7: No
Re: CNC12 ver 4.5 "bugs" summary
If you are concerned about probing bugs, just use the ProbeApp for all your probing as it is not impacted by any of the currently existing bugs. I just posted about the new features of ProbeApp V2 HERE
-swissi
If you are using Fusion 360, check out my CNC12 specific Post Processor
If you are using a Touch Probe, Tool Touch Off Device or a Triple Corner Finder Plate, check out my ProbeApp
Contact me at swissi2000@gmail.com
If you are using a Touch Probe, Tool Touch Off Device or a Triple Corner Finder Plate, check out my ProbeApp
Contact me at swissi2000@gmail.com