Can drive fault 9031 message be caused by under powered computer?
New acorn set-up with a friends laptop. Everything works except drive fault error 9031 when the cnc router is moved around. I’m still waiting for my more powerful computer to arrive.
Any input helps
Thanks!!
Drive fault 9031
Moderator: cnckeith
Re: Drive fault 9031
No.
A servo drive fault is detected and reported by the PLC program, running on the Acorn. It runs independently of the PC processor.
A servo drive fault is detected and reported by the PLC program, running on the Acorn. It runs independently of the PC processor.
-
- Posts: 23
- Joined: Mon Oct 12, 2020 11:01 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: 78047384BB1C-0130191582 (Digitizing Bundle 2B991 Mill 4.12
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
Re: Drive fault 9031
Is this typically addressed by a change to Wizard settings or ?
-
- Posts: 9914
- Joined: Tue Mar 28, 2017 12:01 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Location: Mesa, AZ
Re: Drive fault 9031
Artwood, you are asking us to guess at your situation.
Please follow this post:viewtopic.php?f=60&t=1043
We can not "see" what you "see"
Happy to help with more information.
Marty
Reminder, for support please follow this post: viewtopic.php?f=20&t=383
We can't "SEE" what you see...
Mesa, AZ
We can't "SEE" what you see...
Mesa, AZ