Fine DRO.....its really FINE

All things related to the Centroid Acorn CNC Controller

Moderator: cnckeith

Post Reply
zz0122
Posts: 29
Joined: Wed Sep 30, 2020 11:23 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
MPU11 & GPIO4D -w/ 3rd Party Drives: No
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
CNC Control System Serial Number: none

Fine DRO.....its really FINE

Post by zz0122 »

After all the problem I went through, Finally I got the machine setup the way I want.
Now it's time to setup the Precision.
After do some research I end followed the step from the Video below (Thanks Marty).



I draw simple square and circle with Aspire to test the accuracy.
Boy oh boy....its spot on....

100mmX100mm
IMG_7114.jpg
IMG_7114.jpg (22.74 KiB) Viewed 92 times
IMG_7113.jpg
IMG_7113.jpg (24.1 KiB) Viewed 92 times
with helped from ProbeApp (Thanks Swissi) , I start my cut.

at 1st I only expected +/- 1% is good enough for me. since im doing this just for hobby not production.
But the final result really surprised me
IMG_7107.jpg
IMG_7107.jpg (33.92 KiB) Viewed 92 times
IMG_7108.jpg
IMG_7108.jpg (33.34 KiB) Viewed 92 times
IMG_7110.jpg
IMG_7110.jpg (31.86 KiB) Viewed 92 times
IMG_7109.jpg
IMG_7109.jpg (33.95 KiB) Viewed 92 times
IMG_7111.jpg
IMG_7111.jpg (32.98 KiB) Viewed 92 times
I spent almost 2 hours to get my servo dialed up (New User), but its well worth it.
If anybody have better suggestions, Im all ears...
Now time to tram the machine....

Thanks Everybody...and what a Great Community, I didn't regret spend more money with Acorn instead other board and software.
Post Reply