Centroid Community CNC Support Forum

cnckeith wrote: ↑Tue Oct 27, 2020 4:20 pm and for those text challenged here is a video showing you how..

How does this work with the Virtual Control Panel buttons? I tried it with output 1 SpinFWD, output 2 SpinRev and output 3 OUTPUT3. The M3, M4 and M5 MDI commands work, but using the manual buttons on the VCP, only the output 1 or 2 work.

post a fresh report.zip so we can see how you have things configured

Here is my report.

read this manual.

https://www.centroidcnc.com/centroid_di ... manual.pdf

and you can watch this video for an introduction

cnckeith wrote: ↑Tue Oct 27, 2020 4:20 pm and for those text challenged here is a video showing you how..

You sweet voice of a god man thank you! I knew there had to be a simpler way of doing this.