Output1 with spindle on < simple how to video at end>

All things related to the Centroid Acorn CNC Controller

Moderator: cnckeith

eiwoh
Posts: 2
Joined: Fri Dec 13, 2019 5:03 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
MPU11 & GPIO4D -w/ 3rd Party Drives: No
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
CNC Control System Serial Number: 3403DE650334-0919192464

Re: Output1 with spindle on

Post by eiwoh »

cnckeith wrote: Tue Oct 27, 2020 4:20 pm and for those text challenged here is a video showing you how..

How does this work with the Virtual Control Panel buttons? I tried it with output 1 SpinFWD, output 2 SpinRev and output 3 OUTPUT3. The M3, M4 and M5 MDI commands work, but using the manual buttons on the VCP, only the output 1 or 2 work.
cnckeith
Posts: 3595
Joined: Wed Mar 03, 2010 4:23 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: Yes
MPU11 & GPIO4D -w/ 3rd Party Drives: Yes
DC3IOB: Yes
CNC11: Yes
CPU10 or CPU7: Yes
CNC Control System Serial Number: none
Contact:

Re: Output1 with spindle on < simple how to video at end>

Post by cnckeith »

post a fresh report.zip so we can see how you have things configured
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
eiwoh
Posts: 2
Joined: Fri Dec 13, 2019 5:03 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
MPU11 & GPIO4D -w/ 3rd Party Drives: No
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
CNC Control System Serial Number: 3403DE650334-0919192464

Re: Output1 with spindle on < simple how to video at end>

Post by eiwoh »

Here is my report.
Attachments
report_3403DE650334-0919192464_2020-11-20_18-50-56.zip
(591.03 KiB) Downloaded 82 times
cnckeith
Posts: 3595
Joined: Wed Mar 03, 2010 4:23 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: Yes
MPU11 & GPIO4D -w/ 3rd Party Drives: Yes
DC3IOB: Yes
CNC11: Yes
CPU10 or CPU7: Yes
CNC Control System Serial Number: none
Contact:

Re: Output1 with spindle on < simple how to video at end>

Post by cnckeith »

read this manual.

https://www.centroidcnc.com/centroid_di ... manual.pdf

and you can watch this video for an introduction

Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
mrp192
Posts: 85
Joined: Sat Oct 10, 2020 4:32 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
MPU11 & GPIO4D -w/ 3rd Party Drives: No
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
CNC Control System Serial Number: 3699, 3788

Re: Output1 with spindle on

Post by mrp192 »

cnckeith wrote: Tue Oct 27, 2020 4:20 pm and for those text challenged here is a video showing you how..

You sweet voice of a god man thank you! I knew there had to be a simpler way of doing this.
Post Reply