Spindle RpM
Moderator: cnckeith
-
- Posts: 31
- Joined: Sat May 26, 2018 8:01 am
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: 0943
- DC3IOB: No
- CNC11: No
- CPU10 or CPU7: No
- Location: Franklin,NC
Spindle RpM
Is there any other way to input spindle rpm to the acorn other than using a encoder? I really have no way to mount a extra timing gear on my machine. Thanks. John
-
- Posts: 152
- Joined: Sun Sep 16, 2018 7:51 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC11: No
- CPU10 or CPU7: No
Re: Spindle RpM
try posting in the other part of the forum. Don't get as many people seeing it in the tech tips section.
-
- Posts: 3072
- Joined: Tue Mar 22, 2016 10:03 am
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: Yes
- CNC Control System Serial Number: 100505
100327
102696
103432
7804732B977B-0624192192 - DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: Boston, MA
- Contact:
Re: Spindle RpM
Encoder input is the only spindle feedback mechanism.
Cheers,
Tom
Confidence is the feeling you have before you fully understand the situation.
I have CDO. It's like OCD, but the letters are where they should be.
Tom
Confidence is the feeling you have before you fully understand the situation.
I have CDO. It's like OCD, but the letters are where they should be.