Stepperonline CL86Y motor wiring error

All things related to the Centroid Acorn CNC Controller

Moderator: cnckeith

Post Reply
Marik
Posts: 60
Joined: Sun Dec 08, 2013 1:42 am
Allin1DC CNC Controller: Yes
CNC Control System Serial Number: none
DC3IOB: No
CNC11: Yes
CPU10 or CPU7: No

Stepperonline CL86Y motor wiring error

Post by Marik »

Hey Folks,

Just wanted to share the color code error in the manual for the Stepperonline CL86Y. Finally, got to changing the NEMA34 steppers on my Hardinge HC/Omni Turn slide with Acorn board with closed loop steppers with CL86Y drivers. The main problem for changing was the threading with regular steppers was inconsistent and kept ruining parts. I was following color code printed in the manual for the motor and the system was totally confused, throwing drive errors. After measuring it and few times trying/changing polarity the correct color code is A+ Green, A- White, B+ Black, B- Blue for CW direction. The encoder wiring is fine. The threading now is perfect and very consistent.

Hope this is of help for someone.

Best, M
Post Reply