When I switch to tablet mode on Windows 10, the VCP hides behind the main screen. Is this a Windows issue? How to resolve?
Thanks in advance.
VCP Disapears <resolved, don't use tablet mode>
Moderator: cnckeith
-
- Posts: 431
- Joined: Mon Jul 18, 2011 9:57 am
- Allin1DC CNC Controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
Re: VCP Disapears
CNC12 has not been tested in Tablet mode. It sounds very much like a Windows, as in tablet mode it tries to only show one "app" at a time and is getting confused with the VCP. There might be workarounds but running in tablet mode is not currently something supported.
When requesting support READ THIS POST first. https://www.viewtopic.php?f=60&t=1043
Please ALWAYS post a FRESH report. To make a report: https://www.youtube.com/watch?v=Ecvg0VJp1oQ.
(We pride ourselves on providing timely solid technical support but, without good information we may not be able to help and/or reply until such information is posted.)
Please ALWAYS post a FRESH report. To make a report: https://www.youtube.com/watch?v=Ecvg0VJp1oQ.
(We pride ourselves on providing timely solid technical support but, without good information we may not be able to help and/or reply until such information is posted.)
-
- Posts: 573
- Joined: Wed Aug 29, 2018 11:15 am
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: 985DADEB24D5-0309180716
- DC3IOB: No
- CNC11: No
- CPU10 or CPU7: No
Re: VCP Disapears
Just out of curiosity: Why do you want to run CNC12 in Tablet Mode?
-swissi
If you are using Fusion 360, check out my CNC12 specific Post Processor
If you are using a Touch Probe, Tool Touch Off Device or a Triple Corner Finder Plate, check out my ProbeApp
Contact me at swissi2000@gmail.com
If you are using a Touch Probe, Tool Touch Off Device or a Triple Corner Finder Plate, check out my ProbeApp
Contact me at swissi2000@gmail.com
-
- Posts: 9914
- Joined: Tue Mar 28, 2017 12:01 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Location: Mesa, AZ
Re: VCP Disapears
Does your PC meet these requirements?
https://www.centroidcnc.com/cnc_pc_perf ... ments.html
Display must be 1080P
Not advisable to use a tablet or a notebook. Many use Intel NUC, Lenovo Tiny PC's etc meeting the minimum system requirements.
Marty
Reminder, for support please follow this post: viewtopic.php?f=20&t=383
We can't "SEE" what you see...
Mesa, AZ
We can't "SEE" what you see...
Mesa, AZ
-
- Posts: 11
- Joined: Tue Aug 11, 2020 7:55 am
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: 3403de637ad6-0920192480
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
Re: VCP Disapears
[/quote]
Just out of curiosity: Why do you want to run CNC12 in Tablet Mode?
-swissi
[/quote]
We were just trying it out. Switched back to normal mode and all is fine. Thanks
Just out of curiosity: Why do you want to run CNC12 in Tablet Mode?
-swissi
[/quote]
We were just trying it out. Switched back to normal mode and all is fine. Thanks