Can CNC12 Ver 4.5 be Run in a "Simulation" Mode?

[frostheave]

I am away from home and would like to run Acorn CNC12 Ver. 4.5 without
having my Controller connected. This would allow me to practice making
custom VCP layouts while I am away.

Is this possible?

[ShawnM]

I read somewhere in another topic that you cannot do this but they are working on adding this feature to future versions.

[gerald martin]

Here you go: viewtopic.php?f=60&t=4275

The Centroid team has made amazing progress in the 1.5 years or so that I have been using CNC12. I have no doubt at all that they will do it.

Gerald

[brandx]

so i was cutting away one day and the my cnc just stop cutting but the dro was still moving i went over all the wires even got new ones but still not working i have repacled everthing but the acorn unit any help

[frostheave]

Thanks ShawnM for your reply.

Gerald, I just installed "CNC12 Mill Emulator v4.14" based on your link. Thanks for that.
Now I can test-run programs and macros, cool. It is good to hear a proper simulator is
"on the list" and I agree they will come through.

Bob

[cnckeith]

so i was cutting away one day and the my cnc just stop cutting but the dro was still moving i went over all the wires even got new ones but still not working i have repacled everthing but the acorn unit any help

you need to make a new post and follow these guidelines

viewtopic.php?f=60&t=1043