I currently have a copy of Acorn Mill Pro and an Acorn CNC Controller.
If I purchase another controller, can I use the same copy of Mill Pro
for both controllers?
Thanks for your help.
Acorn Mill Pro Software and a 2nd Acorn CNC Controller
Moderator: cnckeith
-
- Posts: 8
- Joined: Mon Oct 15, 2018 7:20 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: This is for CNC-12. 38D2693C24B6-0725181075
- DC3IOB: No
- CNC11: No
- CPU10 or CPU7: No
-
- Posts: 3102
- Joined: Tue Mar 22, 2016 10:03 am
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: Yes
- CNC Control System Serial Number: 100505
100327
102696
103432
7804732B977B-0624192192 - DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: Boston, MA
- Contact:
Re: Acorn Mill Pro Software and a 2nd Acorn CNC Controller
Nope. Software license is linked to the individual controller. You CAN use the pro license on multiple computers, but can only control the Acorn it is licensed to.
Cheers,
Tom
Confidence is the feeling you have before you fully understand the situation.
I have CDO. It's like OCD, but the letters are where they should be.
Tom
Confidence is the feeling you have before you fully understand the situation.
I have CDO. It's like OCD, but the letters are where they should be.
-
- Posts: 8
- Joined: Mon Oct 15, 2018 7:20 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: This is for CNC-12. 38D2693C24B6-0725181075
- DC3IOB: No
- CNC11: No
- CPU10 or CPU7: No
Re: Acorn Mill Pro Software and a 2nd Acorn CNC Controller
Very good, understood.
Thanks for the quick reply Tom.
Thanks for the quick reply Tom.