Hi,
I have just tried to install my MPG-4 on my computer, but I fell at Step4. When I open cncWizard, I do not have tab 4 as "Control Peripherals". All I have is:
1 - Primary System Configuration
2 - Axis Configuration
3 - Spindle Setup
4 - Advanced Axis Configuration
5 - DB25 Signal Mapping
I have tried installing the USB receiver in different USB ports and rebooting the PC (and Acorn), but cannot get the desired Tab. What might I be doing wrong?
Regards
Dave
Wireless MPG Setup
Moderator: cnckeith
-
- Posts: 2
- Joined: Sat Jun 27, 2020 6:41 am
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: 38D2694E0B80-0111180518
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
Wireless MPG Setup
- Attachments
-
- report_38D2694E0B80-0111180518_2020-06-27_10-50-36.zip
- (160.39 KiB) Downloaded 50 times
-
- Posts: 9914
- Joined: Tue Mar 28, 2017 12:01 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Location: Mesa, AZ
Re: Wireless MPG Setup
Problem is you are running CNC12 4.10, not been supported for some time.
You need to upgrade to 4.50
Instructions:
viewtopic.php?f=60&t=4457
You need to upgrade to 4.50
Instructions:
viewtopic.php?f=60&t=4457
Reminder, for support please follow this post: viewtopic.php?f=20&t=383
We can't "SEE" what you see...
Mesa, AZ
We can't "SEE" what you see...
Mesa, AZ
-
- Posts: 2
- Joined: Sat Jun 27, 2020 6:41 am
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: 38D2694E0B80-0111180518
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
Re: Wireless MPG Setup
That was it. Upgraded to 4.50 (with some huffin' & puffin') & the MPG is working now.
Thank you
Thank you
-
- Posts: 9914
- Joined: Tue Mar 28, 2017 12:01 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Location: Mesa, AZ
Re: Wireless MPG Setup
It's a little different. The Wizard as you found is now in the Utilities menu. Glad you got upgraded ok.
Enjoy!
Marty
Reminder, for support please follow this post: viewtopic.php?f=20&t=383
We can't "SEE" what you see...
Mesa, AZ
We can't "SEE" what you see...
Mesa, AZ