HELLOO TO ALL...
I have a DC bushless motor .750hp./500watts lathe spindle motor...
I can not find info.about KBCC-125R/KBSI-240D if these will work with DC bushless motors...
I know they work with DC bush motors....
So Im asking if anyone knows or has INFO. about this...
Thank You...
BOB...
K-B/CONTROLLER...
Moderator: cnckeith
-
tblough
- Posts: 3102
- Joined: Tue Mar 22, 2016 10:03 am
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: Yes
- CNC Control System Serial Number: 100505
100327
102696
103432
7804732B977B-0624192192 - DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: Boston, MA
- Contact:
Re: K-B/CONTROLLER...
Well, 20 seconds of Googling turns up this: It's for shunt wound and PM DC motors.
- Attachments
-
- kbcc-125r_dat.pdf
- (90.12 KiB) Downloaded 106 times
Cheers,
Tom
Confidence is the feeling you have before you fully understand the situation.
I have CDO. It's like OCD, but the letters are where they should be.
Tom
Confidence is the feeling you have before you fully understand the situation.
I have CDO. It's like OCD, but the letters are where they should be.
-
ZZBOB
- Posts: 31
- Joined: Sun Mar 02, 2014 7:18 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: No
- CNC Control System Serial Number: 20915A (1124081904)
- DC3IOB: No
- CNC12: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Location: SO. TRENTON
Re: K-B/CONTROLLER...
ROGER THAT...
Did not know that ....
Thank You....
Did not know that ....
Thank You....