Brought in to wire up a Acorn Controller to a Three axis servo motors. Servo controllers is Chinese a TIJD brillant XKM-30, Model XK80AEA07530-SCK.
Manual written in Chinese anyone have any experience wiring this up and can provide a wiring diagram thanks,
acorn centroid
Moderator: cnckeith
-
ontarioorchard
- Posts: 1
- Joined: Fri May 15, 2020 10:59 am
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
-
Dave_C
- Posts: 669
- Joined: Wed Nov 15, 2017 8:25 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC11: No
- CPU10 or CPU7: No
- Location: Springfield, MO. USA
- Contact:
Re: acorn centroid
I have no idea what these are but here is the first step.
Do these Servos take step and direction inputs?
Dave
Do these Servos take step and direction inputs?
Dave
Grizzly G0678 Mill ,CNC conversion with Acorn. G4004G Lathe, Mach 3 conversion to Acorn.
-
martyscncgarage
- Posts: 9914
- Joined: Tue Mar 28, 2017 12:01 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Location: Mesa, AZ
Re: acorn centroid
Please follow this post. Provide much more information:
viewtopic.php?f=20&t=383
What do you mean "Brought in"?
viewtopic.php?f=20&t=383
What do you mean "Brought in"?
Reminder, for support please follow this post: viewtopic.php?f=20&t=383
We can't "SEE" what you see...
Mesa, AZ
We can't "SEE" what you see...
Mesa, AZ