F1210HS - Questions on wiring diagram

All things related to the Centroid Acorn CNC Controller

Moderator: cnckeith

Post Reply
LorenzoRR
Posts: 77
Joined: Sat Apr 11, 2020 5:28 am
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No

F1210HS - Questions on wiring diagram

Post by LorenzoRR »

Hi Marty,

I have few questions about drawing S15031 (wiring diagram 220V single phase):

(my closed loop steppers are rated 6.0 Amps max)

1) Do I understand correctly that contactor 1 needs 6 lines and 1 for coil 24VDC?
11a-Pregunta-contactor.JPG
How can I get so many, because I am able to find only 3poles+1 NC+1 coil 24VDC: example, Siemens SIRIUS 3RT2017-1BB42 https://www.automation24.es/contactor-s ... 2017-1bb42

2) What is OCR2?
11b-Pregunta-OCR2-y-CNT2.JPG
3) What means "HIGH-LOW RANGE SWITCH/ NC" in "IN3"?
11c-Pregunta-Inputs-Acorn.JPG
4) I understand that switches for home/limit are the same, and discrimination of what to do comes from sinking in inputs "IN1" or "IN2", correct?
11d-Pregunta-Home-Limit-Switches-Same.JPG
Thanks very much.

Lorenzo
Lorenzo
Prototyping with: EMCO CT60, Klipfeld K120 and Wabeco F1210HS
HFS Suspension
Post Reply