Huan Yang VFD/Spindle not spinning (Resolved)

[martyscncgarage]

Can You please post your finaly picture of your vfd.
Did you jump form (under) DCM to FOR and did you make jumper from P + to PR?
This post give me so much information beacuse I have to wire my vfd.

Which HY VFD do you have? HY or GT?

Attached are my notes, they may help you get started.

Marty

[sahtijan]

Can You please post your finaly picture of your vfd.
Did you jump form (under) DCM to FOR and did you make jumper from P + to PR?
This post give me so much information beacuse I have to wire my vfd.

Which HY VFD do you have? HY or GT?

Attached are my notes, they may help you get started.

Marty

Hellou Marty. I have folow all your instruction on this forum and YouTube and everything works perfect. Today I have made my fist piece. Everything works so good.
But I have one little problem.
When I recall g code, same tool, same G54, same g code, same piece, my WCS G54 moves a litlle bit in negative direction,(all 3 axis) .I use Acorn Pro a it is router without atc.
Do you know what can be problem.

[sahtijan]

And where is best place on this forum to post my succes story with pics. I built my first cnc
router and what Centroid do with you and their peolpe it is simple amazing.
It is My fist "problem" that I have.

[martyscncgarage]

Can You please post your finaly picture of your vfd.
Did you jump form (under) DCM to FOR and did you make jumper from P + to PR?
This post give me so much information beacuse I have to wire my vfd.

Which HY VFD do you have? HY or GT?

Attached are my notes, they may help you get started.

Marty

Hellou Marty. I have folow all your instruction on this forum and YouTube and everything works perfect. Today I have made my fist piece. Everything works so good.
But I have one little problem.
When I recall g code, same tool, same G54, same g code, same piece, my WCS G54 moves a litlle bit in negative direction,(all 3 axis) .I use Acorn Pro a it is router without atc.
Do you know what can be problem.

You need to start your own NEW TOPIC
Please follow this post and provide the information requested, especially provide a fresh Report
http://centroidcncforum.com/viewtopic.php?f=20&t=383

[martyscncgarage]

And where is best place on this forum to post my succes story with pics. I built my first cnc
router and what Centroid do with you and their peolpe it is simple amazing.
It is My fist "problem" that I have.

In the Success Stories Forum:
viewforum.php?f=20

Thank you for sharing you project with everyone!