Confused with Huanyang GT series setup.
Moderator: cnckeith
-
- Posts: 137
- Joined: Tue Mar 03, 2020 8:48 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
Re: Confused with Huanyang GT series setup.
I could not enter any info for the PD settings. It will not allow it. I got inputs into p0.03, 0.04, 0.05, 0.11 0.12 and then p2.01-2.05. Maybe the pd settings aren't available because of the autotune feature of the gt series? I have it wired up and running from the control panel on the front of the vfd. I'm working on wiring up the acorn board now. I've got to stop for a few hours to do some other things. I hope to get it running off acorn tonight or in the morning. I'm gonna follow Mike's diagram and see what happens.
-
- Posts: 137
- Joined: Tue Mar 03, 2020 8:48 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
Re: Confused with Huanyang GT series setup.
I got everything hooked up and running. I didn't have too much difficulty going off Mike's wiring diagram and Marty's parameters. I will post my parameters when I get back in the shop. I still need to hook up the braking resistor. The resistor has no + or - markings on it. Is there a way to tell the difference of does it not matter when I connect it up?
-
- Posts: 9914
- Joined: Tue Mar 28, 2017 12:01 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Location: Mesa, AZ
Re: Confused with Huanyang GT series setup.
No polarity to a resistor. Just hook it up....
Reminder, for support please follow this post: viewtopic.php?f=20&t=383
We can't "SEE" what you see...
Mesa, AZ
We can't "SEE" what you see...
Mesa, AZ
-
- Posts: 137
- Joined: Tue Mar 03, 2020 8:48 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
Re: Confused with Huanyang GT series setup.
thanks for your help! It's much appreciated!