Lathe SolidCam Post Processor for Acorn.

All things related to the Centroid Acorn CNC Controller

Moderator: cnckeith

Post Reply
cscristian
Posts: 6
Joined: Mon Mar 02, 2020 8:02 am
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No

Re: Lathe SolidCam Post Processor for Acorn.

Post by cscristian »

tblough wrote: ↑Wed Mar 17, 2021 8:31 am Here's the all the post processor files for my mill and lathe. This includes the post processor (.gpp), the pre-processor (.prp), and the machine definition files (.vmid). looks like iNumber_of_Fixtures is defined in the pre-processor file.
Now is working.The problem was the missing file.Thank you for sharing
Top
Post Reply

Return to “Centroid Acorn CNC Controller”