Hi guys,
I Have been running my G0602 CNC conversion with Acorn with zero issues for the last year, has produced a ton of chips.
Just wondering if there is a way to start in the middle of a program like on a Haas CNC? That way I dont have to rerun all my operations/tools and just run one specific operation.
Any help is appreciated.
Starting in middle of program
Moderator: cnckeith
-
- Posts: 369
- Joined: Thu Nov 15, 2018 10:07 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: F045DA7CBF8b-103011290
- DC3IOB: No
- CNC11: No
- CPU10 or CPU7: No
Re: Starting in middle of program
Step 1 would be to locate the Line Number or N number in the Gcode.
Step 2 would be to load the Gcode
Step 3 would be to goto F4, Run Menu
Step 4 would be to click search, and paste in or type in the Line or N number and hit Start.
Step 2 would be to load the Gcode
Step 3 would be to goto F4, Run Menu
Step 4 would be to click search, and paste in or type in the Line or N number and hit Start.
-
- Posts: 2
- Joined: Fri Feb 21, 2020 2:34 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
Re: Starting in middle of program
thanks will try.