That usually does the trick.pescadoman wrote: ↑Thu Feb 13, 2020 6:36 pm IDIOT ALERT. Once you follow the simple directions and jump the 24v and wire up an E stop... it works.
mx4660 issues (Resolved)
Moderator: cnckeith
-
ShawnM
- Posts: 2234
- Joined: Fri May 24, 2019 8:34 am
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: 7804734C6498-0401191832
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: Clearwater, FL
Re: mx4660 issues
-
frijoli
- Posts: 595
- Joined: Tue Sep 12, 2017 10:03 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: 1030090099
- DC3IOB: Yes
- CNC12: Yes
- CNC11: Yes
- CPU10 or CPU7: No
- Location: Outside Winston-Salem, NC
- Contact:
Re: mx4660 issues
Are you saying you have disabled the e-stop, or didn't wire the e-stop correctly?pescadoman wrote: ↑Thu Feb 13, 2020 6:36 pm IDIOT ALERT. Once you follow the simple directions and jump the 24v and wire up an E stop... it works.
Clay
near Winston-Salem, NC
unofficial ACORN fb group https://www.facebook.com/groups/897054597120437/
near Winston-Salem, NC
unofficial ACORN fb group https://www.facebook.com/groups/897054597120437/
-
martyscncgarage
- Posts: 9914
- Joined: Tue Mar 28, 2017 12:01 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Location: Mesa, AZ
Re: mx4660 issues
He didn't have the Estop button wired correctly for his drivefrijoli wrote: ↑Sun Feb 16, 2020 11:59 amAre you saying you have disabled the e-stop, or didn't wire the e-stop correctly?pescadoman wrote: ↑Thu Feb 13, 2020 6:36 pm IDIOT ALERT. Once you follow the simple directions and jump the 24v and wire up an E stop... it works.
Reminder, for support please follow this post: viewtopic.php?f=20&t=383
We can't "SEE" what you see...
Mesa, AZ
We can't "SEE" what you see...
Mesa, AZ