Nicely done!
Marty
Portable CNC 5c Collet Lathe Pics
Moderator: cnckeith
-
- Posts: 9914
- Joined: Tue Mar 28, 2017 12:01 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Location: Mesa, AZ
Re: Portable CNC 5c Collet Lathe Pics
Reminder, for support please follow this post: viewtopic.php?f=20&t=383
We can't "SEE" what you see...
Mesa, AZ
We can't "SEE" what you see...
Mesa, AZ
-
- Posts: 111
- Joined: Tue Aug 14, 2018 10:49 am
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: noneC120192
- DC3IOB: No
- CNC11: No
- CPU10 or CPU7: No
- Location: Denver, CO
Re: Portable CNC 5c Collet Lathe Pics
That is so very cool - great job!!
Do I dare ask what the red stains on the turret lock are? Hopefully not reminders to keep your fingers clear when it's running.
Do I dare ask what the red stains on the turret lock are? Hopefully not reminders to keep your fingers clear when it's running.
-
- Posts: 127
- Joined: Wed Jul 10, 2019 9:24 am
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
Re: Portable CNC 5c Collet Lathe Pics
Thanks! The red stains are marking fluid as some of the non-critical cuts and holes were just marked and cut/drilled. The final version will all be CNC'd, where possible.