As Tom said. IF you set up your machine correctly (did you follow the FINE DRO) tuning (attached) Use a long known dimension standard. I have a 12" end measure I use on setting up mills I had calibrated with a CMM. I also have a set of solid 1-2-3 blocks I also had calibrated.
Then use ballscrew comp. What kind of machine do you have? Picture?
LINEAR encoder
Moderator: cnckeith
-
martyscncgarage
- Posts: 9914
- Joined: Tue Mar 28, 2017 12:01 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Location: Mesa, AZ
Re: LINEAR encoder
- Attachments
-
- Centroid Fine DRO Adjustment.pdf
- (459.51 KiB) Downloaded 85 times
Reminder, for support please follow this post: viewtopic.php?f=20&t=383
We can't "SEE" what you see...
Mesa, AZ
We can't "SEE" what you see...
Mesa, AZ