Stepper missing steps tried PLC968 not fixed

All things related to the Centroid Acorn CNC Controller

Moderator: cnckeith

Post Reply
frijoli
Posts: 595
Joined: Tue Sep 12, 2017 10:03 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: 1030090099
DC3IOB: Yes
CNC12: Yes
CNC11: Yes
CPU10 or CPU7: No
Location: Outside Winston-Salem, NC
Contact:
Contact frijoli

Re: Stepper missing steps tried PLC968 not fixed

Post by frijoli »

Toysrfun wrote: ↑Sat Jan 18, 2020 2:01 am Took the steppers off and used ac servos and it machines very nice and in fact it plows through aluminum dry better than my m400 bed mill. Thanks for the input even though nothing suggested/advised had helped.
Those are stepper drives in the photos???
As to the suggestions, you clearly didn't do most of them and report back.
Happy to see you're up and running but the problem was NOT what you believe it was.
Clay
near Winston-Salem, NC
unofficial ACORN fb group https://www.facebook.com/groups/897054597120437/
Top
Post Reply

Return to “Centroid Acorn CNC Controller”