EMCO Turn 55 Time based tool changer

All things related to the Centroid Acorn CNC Controller

Moderator: cnckeith

martyscncgarage
Posts: 9912
Joined: Tue Mar 28, 2017 12:01 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC12: Yes
CNC11: Yes
CPU10 or CPU7: Yes
Location: Mesa, AZ

Re: EMCO Turn 55 Time based tool changer

Post by martyscncgarage »

Ian Dunlop wrote: Sat Dec 03, 2022 2:40 pm
Jr914 wrote: Tue Jun 16, 2020 6:27 pm Marty

Is the reverse polarity voltage of 3.2v applied to the Emco tool changer is always present accept for a tool change command when the 12v is applied d.p.d.t from the relay?

John
Marty i'm unable to get down to 3.2 volts can got down to would 3.3v would that still work?
thanks Ian
A tenth of a volt is not an issue.
Reminder, for support please follow this post: viewtopic.php?f=20&t=383
We can't "SEE" what you see...
Mesa, AZ
Ian Dunlop
Posts: 10
Joined: Fri Dec 20, 2019 11:01 am
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC12: Yes
CNC11: Yes
CPU10 or CPU7: Yes

Re: EMCO Turn 55 Time based tool changer

Post by Ian Dunlop »

Thanks, got it working great.

Ian
Post Reply