Acorn Schematic update

All things related to the Centroid Acorn CNC Controller

Moderator: cnckeith

Post Reply
cnckeith
Posts: 7166
Joined: Wed Mar 03, 2010 4:23 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: Yes
CNC Control System Serial Number: none
DC3IOB: Yes
CNC11: Yes
CPU10 or CPU7: Yes
Contact:

Acorn Schematic update

Post by cnckeith »

Hello! I am happy to announce that the Acorn schematic set has been updated.. be sure to download the latest.
1.) We added a new table on many of the schematics that shows the Wizard input and outputs used that correspond to the schematic.
2.) GeckoDrive hookup schematics have been updated using the DB25 header for the step and direction connections
3.) Ether1616 schematics have been added

the download link is on the Acorn web page about 1/3 of the way down..here is the link.
https://www.centroidcnc.com/centroid_di ... oller.html
acorn schematics link.PNG
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
Post Reply