Looking for a few good beta testers...

All things related to the Centroid Acorn CNC Controller

Moderator: cnckeith

Post Reply
cnckeith
Posts: 7166
Joined: Wed Mar 03, 2010 4:23 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: Yes
CNC Control System Serial Number: none
DC3IOB: Yes
CNC11: Yes
CPU10 or CPU7: Yes
Contact:

Looking for a few good beta testers...

Post by cnckeith »

Do you consider yourself an advanced user? Do you have the time to test software to help flush out bugs so the released version of CNC12 is as clean as possible? then read on....

Centroid Dealer Beta Software/Tester agreement:
Being a Centroid Beta tester will cost you time and money.
Centroid beta tester requirements.
1.) CNCPC that meets our requirements found here.. http://www.centroidcnc.com/cnc_pc_perfo ... ments.html
2.) Touch screen LCD
3.) Internet connection to the CNCPC , install Teamviewer with speakers and microphone here is how  http://centroidcncforum.com/viewtopic.php?f=60&t=973
4.) Beta testers should not post questions or problems on Centroid forum about anything regarding the use of BETA software as we don’t want to confuse a forum readers and have them think the discussion is about the current release of CNC12.
5.) Create, populate and maintain an online photo album with detailed photos of the machine tool, accessories, control cabinet, operator interface and anything else related to the Acorn equipped machine tool in high resolution images so we are familiar with your machine tool(s).
6.) always include a current report.zip system file with any email communication to Centroid support staff here is how to create a report http://centroidcncforum.com/viewtopic.php?f=60&t=943
7.) Provided Centroid tech support with information that they request in a timely manner so we can get to a resolution asap.
8.) Acknowledgement that when updating to a new beta software that you may have to reset and reenter ALL the machine specific parameters.. steps per rev, turns ratio, accell, etc...etc.. this will take you time and effort.
9.) Agrees not to distribute Centroid beta software by any means.
10.) Agrees to hold Centroid harmless for any damage caused by beta software or by following directions by Centroid employees.

if you are interested Private Message me..thanks! Keith
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
Post Reply