Page 4 of 4

Re: STEPS/revolution

Posted: Sat Sep 21, 2019 8:54 pm
by wagdamotta
Hi To All

Marty, do you think is okay to install the switch for turn off the power in the servo drive before turn the main power off, I don't know If is right to do, you and lot of people not have this problem, DMM told me to install the switch, but I not want.
Please let me know If is okay for me install the switch or get new servos.

Thank you
Wagner Damotta

Re: STEPS/revolution

Posted: Sat Sep 21, 2019 9:57 pm
by martyscncgarage
wagdamotta wrote: Sat Sep 21, 2019 8:54 pm Hi To All

Marty, do you think is okay to install the switch for turn off the power in the servo drive before turn the main power off, I don't know If is right to do, you and lot of people not have this problem, DMM told me to install the switch, but I not want.
Please let me know If is okay for me install the switch or get new servos.

Thank you
Wagner Damotta
You could try an Estop relay.
Use output 1, set it up as NoFault, have it drive a larger relay that opens power to the drives. Just before you power down hit the Estop button, which removes power from the drives. Then power down the control.

Re: STEPS/revolution

Posted: Sat Sep 21, 2019 10:16 pm
by wagdamotta
Thank you
I will try, If I need you can make a diagram show how I connect?
Thank you

Re: STEPS/revolution

Posted: Sat Sep 21, 2019 10:52 pm
by martyscncgarage
Sure

Re: STEPS/revolution

Posted: Wed Jun 09, 2021 10:43 pm
by wagdamotta
Hi Marty
I think in buy a FRYER CNC machine is in good condition and change the control for centroid acorn cnc 12. this modification is possible?
My PM25 is working great, i make some parts, thank you for all the help that i got from you and from centroid.

Re: STEPS/revolution

Posted: Wed Jun 09, 2021 10:45 pm
by martyscncgarage
wagdamotta wrote: Wed Jun 09, 2021 10:43 pm Hi Marty
I think in buy a FRYER CNC machine is in good condition and change the control for centroid acorn cnc 12. this modification is possible?
My PM25 is working great, i make some parts, thank you for all the help that i got from you and from centroid.
Were glad to have helped.
Post a New Topic with pictures and details about the Fryer