Variables available for Tool Path limits?

All things related to the Centroid Acorn CNC Controller

Moderator: cnckeith

Post Reply
wellington_tregear
Posts: 15
Joined: Sat Feb 09, 2019 10:13 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
Location: Monroe Michigan USA

Variables available for Tool Path limits?

Post by wellington_tregear »

I am a long time Mach 2/3 user that has recently converted to Centroid (starting with Acorn, but I might move up). I am loving the switch! 8-)

I have dug around, but do not see variables available that give the limits of the loaded toolpath. They must be somewhere for the toolpath graphing function. Are they available to the end user and what numbers if so? I would like to write a script that moves to the loaded limits to see where a toolpath falls on a piece of material (great for avoiding knots in wood, etc.) Thanks!
Post Reply