Correct wiring for stepper driver

Kutton · Post by **Kutton** » Wed Jan 16, 2019 3:21 pm

Is this the correct wiring for my stepp driver?

Post by **cnckeith** » Wed Jan 16, 2019 3:28 pm

Happy to try and help but you are not giving us enough to go by.
Follow this post:
viewtopic.php?f=60&t=1043

and schematics are here.
http://www.centroidcnc.com/centroid_diy ... matics.zip

Kutton · Post by **Kutton** » Wed Jan 16, 2019 5:21 pm

Please tell me what you would like to see. I am at a loss getting wiring correct.

Kutton · Post by **Kutton** » Wed Jan 16, 2019 5:28 pm

Here is pictures of motor and driver. Would like to also know suggested schematic to use.

Post by **cnckeith** » Wed Jan 16, 2019 5:49 pm

do you have a link to the manual for these drives?

Post by **cnckeith** » Wed Jan 16, 2019 5:54 pm

looks close to leadshine

buy a DB25 breakout board to make wiring to db25 easy
https://www.amazon.com/Connector-D-sub- ... 5+breakout

and try the hookup attached.

Kutton · Post by **Kutton** » Wed Jan 16, 2019 6:33 pm

It is a screenshot of leadshine, but dose not work how ever it is communicating wit x axis. Unable to upload video because it is .mov

Kutton · Post by **Kutton** » Wed Jan 16, 2019 6:34 pm

How do you slave driver?

Kutton · Post by **Kutton** » Wed Jan 16, 2019 10:40 pm

Ordered db 25

Post by **martyscncgarage** » Thu Jan 17, 2019 8:45 am

Kutton wrote: ↑Wed Jan 16, 2019 6:34 pm How do you slave driver?

http://www.centroidcnc.com/centroid_diy ... _guide.pdf
Will be available in a few weeks. You will need to buy Acorn Pro.

Centroid Community CNC Support Forum