Ork board with estun drive software wont move motor

All things related to the Centroid Acorn CNC Controller

Moderator: cnckeith

Post Reply
owgstrength
Posts: 14
Joined: Sun Oct 14, 2018 10:22 am
Acorn CNC Controller: No
Allin1DC CNC Controller: No
Oak CNC controller: Yes
CNC Control System Serial Number: A900662
DC3IOB: No
CNC11: Yes
CPU10 or CPU7: Yes

Ork board with estun drive software wont move motor

Post by owgstrength »

Hey can some one help me with configuring my estun drivers and motor unable to use the software to move the motors. i use the drive to jog the motors Fn002 but cant get it to work with cnc12 software . i might not be doing the right thing can i get some help

Owen
Top
martyscncgarage
Posts: 9914
Joined: Tue Mar 28, 2017 12:01 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC12: Yes
CNC11: Yes
CPU10 or CPU7: Yes
Location: Mesa, AZ

Re: Ork board with estun drive software wont move motor

Post by martyscncgarage »

owgstrength wrote: ↑Sat Dec 01, 2018 7:55 pm Hey can some one help me with configuring my estun drivers and motor unable to use the software to move the motors. i use the drive to jog the motors Fn002 but cant get it to work with cnc12 software . i might not be doing the right thing can i get some help

Owen
Ork board? You mean OAK board or do you have an ACORN board?
Reminder, for support please follow this post: viewtopic.php?f=20&t=383
We can't "SEE" what you see...
Mesa, AZ
Top
cnckeith
Posts: 7334
Joined: Wed Mar 03, 2010 4:23 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: Yes
CNC Control System Serial Number: none
DC3IOB: Yes
CNC11: Yes
CPU10 or CPU7: Yes
Contact:
Contact cnckeith

Re: Ork board with estun drive software wont move motor

Post by cnckeith »

http://www.centroidcnc.com/dealersuppor ... ds/291.pdf
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
Top
Post Reply

Return to “Centroid Acorn CNC Controller”