CWP-4 Setup
Moderator: cnckeith
-
- Posts: 10
- Joined: Mon Oct 22, 2018 6:43 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: 40BD322E7843-0906181181
- DC3IOB: No
- CNC11: No
- CPU10 or CPU7: No
CWP-4 Setup
CWP-4 doesn't work. I have Acorn CNC12 v4.12+ Pro License. Wizard does not save "YES" selection for CWP-4
-
- Posts: 7334
- Joined: Wed Mar 03, 2010 4:23 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Contact:
Re: CWP-4 Setup
need a little more info please. what does "doesn't work" exactly mean.
does the cwp-4 turn on?
and please post a report.
does the cwp-4 turn on?
and please post a report.
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
-
- Posts: 2190
- Joined: Sat Nov 18, 2017 2:32 pm
- Acorn CNC Controller: Yes
- Plasma CNC Controller: No
- AcornSix CNC Controller: Yes
- Allin1DC CNC Controller: No
- Hickory CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: Acorn 238
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: Bergland, MI, USA
- Contact:
Re: CWP-4 Setup
Have you plugged in the receiver yet? Try plugging the receiver in before you set the parm in the wizard
-
- Posts: 10
- Joined: Mon Oct 22, 2018 6:43 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: 40BD322E7843-0906181181
- DC3IOB: No
- CNC11: No
- CPU10 or CPU7: No
Re: CWP-4 Setup
Thanks for your quick response guys. I must apologize for being a dufus in this case. I failed to "Write the new configuration" before exiting Wizard. All working as advertised.
-
- Posts: 9914
- Joined: Tue Mar 28, 2017 12:01 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Location: Mesa, AZ
Re: CWP-4 Setup
No dufus! Happens to all of us. Glad you got it going.
Maryy
Reminder, for support please follow this post: viewtopic.php?f=20&t=383
We can't "SEE" what you see...
Mesa, AZ
We can't "SEE" what you see...
Mesa, AZ