probe settings acorn
Moderator: cnckeith
-
- Posts: 66
- Joined: Fri Aug 17, 2018 11:04 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: 38d2693c4f62-0725181074
- DC3IOB: No
- CNC11: No
- CPU10 or CPU7: No
probe settings acorn
is there a setting so after a z probe the probe will retract? i have a nc standard probe not the one from centroid.
-
- Posts: 9914
- Joined: Tue Mar 28, 2017 12:01 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Location: Mesa, AZ
Re: probe settings acorn
Can you explain a little more what you are trying to do exactly?rangerboy347 wrote: ↑Wed Sep 12, 2018 11:14 am is there a setting so after a z probe the probe will retract? i have a nc standard probe not the one from centroid.
Reminder, for support please follow this post: viewtopic.php?f=20&t=383
We can't "SEE" what you see...
Mesa, AZ
We can't "SEE" what you see...
Mesa, AZ
-
- Posts: 66
- Joined: Fri Aug 17, 2018 11:04 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: 38d2693c4f62-0725181074
- DC3IOB: No
- CNC11: No
- CPU10 or CPU7: No
Re: probe settings acorn
if i am using probe to set z height offset it will prove down touch part and zero then just stay at zero point. there must be a way to make it move up a certain distance after it sets the z zero offset.
-
- Posts: 7334
- Joined: Wed Mar 03, 2010 4:23 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Contact:
Re: probe settings acorn
hello. hit "tool check" after probing and setting the Z zero (WCS) to retract the tool from the work.
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
-
- Posts: 66
- Joined: Fri Aug 17, 2018 11:04 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: 38d2693c4f62-0725181074
- DC3IOB: No
- CNC11: No
- CPU10 or CPU7: No
Re: probe settings acorn
well yea i know that i was just wondering if there was a setting to change it automatically no big deal
-
- Posts: 7334
- Joined: Wed Mar 03, 2010 4:23 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Contact:
Re: probe settings acorn
hello. by definition the Probe Z cycle stops at the detection point so the operator has a chance to set the WCS for Z at that location. if it just retracted to some other location you would lose the probed position.
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html