Change acceleration from G/M code file?

All things related to the Centroid Acorn CNC Controller

Moderator: cnckeith

Post Reply
cnc_rosh
Posts: 2
Joined: Tue Jul 03, 2018 5:45 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC11: No
CPU10 or CPU7: No

Change acceleration from G/M code file?

Post by cnc_rosh »

Hi all,

Is it possible to change the acceleration from a G or M code file on the fly? For example the roughing with a higher acceleration and the finishing with a less value.

Thanks
Top
Post Reply

Return to “Centroid Acorn CNC Controller”