Remote Buttons
Moderator: cnckeith
-
- Posts: 49
- Joined: Wed Feb 28, 2018 12:18 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC11: No
- CPU10 or CPU7: No
Remote Buttons
I have just converted my 4 X 8 router to the centroid system with the Acorn board. I have 3 remote location on the machine that has a EStop Pause and resume buttons. Can someone help me with the input and setting in Centroid. I have most everything up and running. Im thinking the Pause will be a feed hold and the resume will be a cycle start ???