Umbrella ATC - Acorn Compatible
Moderator: cnckeith
-
- Posts: 8511
- Joined: Wed Mar 03, 2010 4:23 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Contact:
Re: Umbrella ATC - Acorn Compatible
no problem i have done that, just make a loop and strain relive it so you can open and close the door.
i've also crammed an e1616 on the cabinet side.
i've also crammed an e1616 on the cabinet side.
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
(Note: Liking will "up vote" a post in the search results helping others find good information faster)
-
- Posts: 630
- Joined: Tue Oct 20, 2020 8:41 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: Arizona
Re: Umbrella ATC - Acorn Compatible
Thank you.
(Note: Liking will "up vote" a post in the search results helping others find good information faster)
Re: Umbrella ATC - Acorn Compatible
Since you have powered components mounted to the door, you should install a bonding (grounding) jumper wire from the main cabinet or panel to the door. In the trade, we don't trust the hinge pins to provide a safe path to ground.
(Note: Liking will "up vote" a post in the search results helping others find good information faster)
-
- Posts: 630
- Joined: Tue Oct 20, 2020 8:41 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: Arizona
Re: Umbrella ATC - Acorn Compatible
Will do. Thanks.
(Note: Liking will "up vote" a post in the search results helping others find good information faster)
-
- Posts: 630
- Joined: Tue Oct 20, 2020 8:41 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: Arizona
Re: Umbrella ATC - Acorn Compatible
Linear Rail Question:
These ATC plans call for SBR16-350 rails and SBR16 slide blocks. Is SBR a brand? I could only find these on Amazon and Aliexpress. I want to make sure these are good enough slides or if should be looking at something else? I have no experience with linear slides.
These ATC plans call for SBR16-350 rails and SBR16 slide blocks. Is SBR a brand? I could only find these on Amazon and Aliexpress. I want to make sure these are good enough slides or if should be looking at something else? I have no experience with linear slides.
(Note: Liking will "up vote" a post in the search results helping others find good information faster)
-
- Posts: 3136
- Joined: Thu Sep 23, 2021 3:49 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: 6433DB0446C1-08115074
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: Germany
Re: Umbrella ATC - Acorn Compatible
Here you go:
https://de.aliexpress.com/item/40011423 ... ecEALw_wcB
I would use HGR20
https://de.aliexpress.com/item/10050059 ... 35821131_6
Uwe
https://de.aliexpress.com/item/40011423 ... ecEALw_wcB
I would use HGR20
https://de.aliexpress.com/item/10050059 ... 35821131_6
Uwe
(Note: Liking will "up vote" a post in the search results helping others find good information faster)
-
- Posts: 630
- Joined: Tue Oct 20, 2020 8:41 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: Arizona
Re: Umbrella ATC - Acorn Compatible
Thanks! What is the advantage of the HGR20?
(Note: Liking will "up vote" a post in the search results helping others find good information faster)
-
- Posts: 3136
- Joined: Thu Sep 23, 2021 3:49 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: 6433DB0446C1-08115074
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: Germany
Re: Umbrella ATC - Acorn Compatible
Better precision with less play.
Uwe
Uwe
(Note: Liking will "up vote" a post in the search results helping others find good information faster)
-
- Posts: 630
- Joined: Tue Oct 20, 2020 8:41 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: Arizona
Re: Umbrella ATC - Acorn Compatible
Thanks Uwe. Here is a video where someone used HGH15/HGR15 assembly.
At the four-minute mark he points out a problem with getting lubrication to both units. Not sure I am crazy about his solution. Let me know what you think.
Also, here is what I am working on for a sensor. It is based on the ideas that Marc from CNCSNW suggested. Marc suggested that the sensor trigger when the carousel is locked.
https://www.dropbox.com/scl/fi/26nos4lo ... n1qvl&dl=0
Thanks... Richard
At the four-minute mark he points out a problem with getting lubrication to both units. Not sure I am crazy about his solution. Let me know what you think.
Also, here is what I am working on for a sensor. It is based on the ideas that Marc from CNCSNW suggested. Marc suggested that the sensor trigger when the carousel is locked.
https://www.dropbox.com/scl/fi/26nos4lo ... n1qvl&dl=0
Thanks... Richard
(Note: Liking will "up vote" a post in the search results helping others find good information faster)
-
- Posts: 3136
- Joined: Thu Sep 23, 2021 3:49 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: 6433DB0446C1-08115074
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: Germany
Re: Umbrella ATC - Acorn Compatible
On an ATC in hobby use it will take a very long time till it needs to be greased again.
Uwe
Uwe
(Note: Liking will "up vote" a post in the search results helping others find good information faster)