CNC12 Tangential Knife

[Joey]

Hello All.

Thought I'd make a Topic On setup and use of a Tangential Knife with CNC12

Setting an axis for Tangential Knife is Available on all Centroid controls on Software version 5.08 and newer.

The CNC12 Tangential Knife Axis Setup TB can be found here: https://www.centroidcnc.com/dealersuppo ... ds/333.pdf

I have the EcoCam Oscillating Tangential Knife mounted on my AcornSIX Brained 4x4 Router.

The EcoCam has a Closed Loop Stepper that Turns the Knife with an Overall Turns ratio of 1:1 at 3200 Steps per revolution.

I Created a Tangential Knife Photo album where I have a Video Cutting the Centroid LOGO out with the Knife on some 3/16th inch Foam board.

Also I have some video's explaining how I created the G-code in Sheetcam and how to modify the post for Sheetcam so the post matches my machine.
The Sheetcam Post Will need extracted from is attached Zip file
Download here

Centroid_Tangential_Knife.zip

(3.83 KiB) Downloaded 2 times

Check out My Tangential Knife Album here: https://photos.app.goo.gl/UxLkTbNgLpeFKmsTA