Shortcuts for feedrate override not all working

Fredsan · Post by **Fredsan** » Sun Oct 15, 2017 4:23 pm

I noticed that the shortcuts for feedrate override CTRL- and CTRL\ are not working, CTRL+ is working.

Pressing the 2 buttons on the virtual jog panel are working, but using the shortcuts on the keyboard or pressing the 2 buttons on the Xkeys pad is not working.

Post by **cnckeith** » Sun Oct 15, 2017 9:46 pm

i just checked it on my system.. its working as it should. please check your PC keyboard, try another one if possible.
can anyone else confirm proper operation of the keyboard short cuts for feedrate override?

Fredsan · Post by **Fredsan** » Mon Oct 16, 2017 1:10 pm

I tried 3 different keyboards (Logitech, Microsoft, HP), all with the same result. CTRL- and CTRL\ not working.

I tested with a Xkeys pad, and also not working. I checked regional settings, and put everything to US. I use an US International keyboard. Checked firewall settings.

Anything else I can check?

Post by **cnckeith** » Mon Oct 16, 2017 1:12 pm

hmmm I would like to remote in to the system and see this first hand please. private message me TV ID and Pass and lets take a look!

Post by **martyscncgarage** » Mon Oct 16, 2017 2:20 pm

I tested on Windows 10 US version, US Keyboards, on Beta lathe and Mill. CTRL+, CTRL-, CTRL\, keyboard short cuts all function properly.
Marty

Centroid Community CNC Support Forum

Shortcuts for feedrate override not all working

Shortcuts for feedrate override not all working

Re: Shortcuts for feedrate override not all working

Re: Shortcuts for feedrate override not all working

Re: Shortcuts for feedrate override not all working

Re: Shortcuts for feedrate override not all working