I noticed that the shortcuts for feedrate override CTRL- and CTRL\ are not working, CTRL+ is working.
Pressing the 2 buttons on the virtual jog panel are working, but using the shortcuts on the keyboard or pressing the 2 buttons on the Xkeys pad is not working.
Shortcuts for feedrate override not all working
Moderator: cnckeith
-
- Posts: 7306
- Joined: Wed Mar 03, 2010 4:23 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Contact:
Re: Shortcuts for feedrate override not all working
i just checked it on my system.. its working as it should. please check your PC keyboard, try another one if possible.
can anyone else confirm proper operation of the keyboard short cuts for feedrate override?
can anyone else confirm proper operation of the keyboard short cuts for feedrate override?
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
-
- Posts: 72
- Joined: Wed Sep 27, 2017 3:07 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC11: No
- CPU10 or CPU7: No
- Location: The Netherlands
Re: Shortcuts for feedrate override not all working
I tried 3 different keyboards (Logitech, Microsoft, HP), all with the same result. CTRL- and CTRL\ not working.
I tested with a Xkeys pad, and also not working. I checked regional settings, and put everything to US. I use an US International keyboard. Checked firewall settings.
Anything else I can check?
I tested with a Xkeys pad, and also not working. I checked regional settings, and put everything to US. I use an US International keyboard. Checked firewall settings.
Anything else I can check?
-
- Posts: 7306
- Joined: Wed Mar 03, 2010 4:23 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Contact:
Re: Shortcuts for feedrate override not all working
hmmm I would like to remote in to the system and see this first hand please. private message me TV ID and Pass and lets take a look!
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
-
- Posts: 9914
- Joined: Tue Mar 28, 2017 12:01 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Location: Mesa, AZ
Re: Shortcuts for feedrate override not all working
I tested on Windows 10 US version, US Keyboards, on Beta lathe and Mill. CTRL+, CTRL-, CTRL\, keyboard short cuts all function properly.
Marty
Marty
Reminder, for support please follow this post: viewtopic.php?f=20&t=383
We can't "SEE" what you see...
Mesa, AZ
We can't "SEE" what you see...
Mesa, AZ