Fourth axis and power problem (resolved with photos)

All things related to the Centroid Acorn CNC Controller

Moderator: cnckeith

martyscncgarage
Posts: 9912
Joined: Tue Mar 28, 2017 12:01 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC12: Yes
CNC11: Yes
CPU10 or CPU7: Yes
Location: Mesa, AZ

Re: Fourth axis and power problem (resolved with photos)

Post by martyscncgarage »

👍
Nice router too by the way. Looking forward to seeing a video of it running under Acorn and CNC12 control.
Marty
Reminder, for support please follow this post: viewtopic.php?f=20&t=383
We can't "SEE" what you see...
Mesa, AZ
dandonegan
Posts: 20
Joined: Sun Apr 03, 2016 2:39 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: No
CNC Control System Serial Number: A900460
DC3IOB: No
CNC11: Yes
CPU10 or CPU7: No
Location: Vermont

Re: Fourth axis and power problem (resolved with photos)

Post by dandonegan »

Here is a picture of the control with the time delay relay installed in case anyone’s interested.


Image

https://photos.app.goo.gl/PIaytV4hpaaTIX7f1

Dan
martyscncgarage
Posts: 9912
Joined: Tue Mar 28, 2017 12:01 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC12: Yes
CNC11: Yes
CPU10 or CPU7: Yes
Location: Mesa, AZ

Re: Fourth axis and power problem (resolved with photos)

Post by martyscncgarage »

Right on Dan. Machine is now functional?
Take a video of the machine doing its thing and the control running when you get a chance.
Marty
Reminder, for support please follow this post: viewtopic.php?f=20&t=383
We can't "SEE" what you see...
Mesa, AZ
cnckeith
Posts: 7166
Joined: Wed Mar 03, 2010 4:23 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: Yes
CNC Control System Serial Number: none
DC3IOB: Yes
CNC11: Yes
CPU10 or CPU7: Yes
Contact:

Re: Fourth axis and power problem (resolved with photos)

Post by cnckeith »

dan thanks for the great photos..nice clean install!
im just reposting here again within the forum.
20171014_171318.jpg
20171014_171332.jpg
20171014_171350.jpg
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
Post Reply