AcornSix issues
Moderator: cnckeith
-
- Posts: 58
- Joined: Sun Apr 28, 2013 9:19 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: Yes
- CNC Control System Serial Number: 1218120647
- DC3IOB: Yes
- CNC12: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Location: Newark, NJ
- Contact:
Re: AcornSix issues
Can I send the AcornSix in for this update.
-
- Posts: 7439
- Joined: Wed Mar 03, 2010 4:23 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Contact:
Re: AcornSix issues
sure thing! please use RMA number 36920
ship to:
Centroid
Attn: RMA #36920
159 Gates Rd.
Howard, PA 16841
pack it well and insure the package.
be sure to let us know exactly where you want it shipped back to, and your cell phone number. send that info to support@centroidcnc.com
along with tracking number and reference the RMA #
and we will get you taking care of.
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
-
- Posts: 58
- Joined: Sun Apr 28, 2013 9:19 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: Yes
- CNC Control System Serial Number: 1218120647
- DC3IOB: Yes
- CNC12: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Location: Newark, NJ
- Contact:
Re: AcornSix issues
I eliminated the possibility there is a wiring issue preventing my AcornSix board from driving XA, XB, and Y axes. I did this by replacing the AcornSix with an AcornCNC board. I plugged the H1 and H2 open collector connectors on the AcornSix directly into the H2 and H3 connectors on the AcornCNC. I reloaded CNC12V5.10 and entered the exact same configuration except for inputs, outputs, and homing. I manually homed the machine and gave it MDI commands. Cofigured with the AcornCNC, there are no issues with the paired XA and XB axes and no issues with the Y axis at either low or high speeds.
I will drop the board in the mail on Monday and provide a tracking number.
Thanks
Rich
I will drop the board in the mail on Monday and provide a tracking number.
Thanks
Rich