Acorn won't run g code/mdi < lathe G98/G99?>
Moderator: cnckeith
-
- Posts: 113
- Joined: Wed Feb 12, 2020 3:18 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: USA
Acorn won't run g code/mdi < lathe G98/G99?>
It jogs, runs the spindle(although the encoder doesn't match the s code), but it won't perform a program. I get a random communications error. I'm running the supplied shielded ethernet cable from Centroid.
Last edited by pescadoman on Sun Apr 21, 2024 7:22 pm, edited 1 time in total.
Re: Acorn won't run g code/mdi
Instead of a copy of your license file, try posting a current Report file from your control. Use F7/Utility -> F7/Report to create one. The file name will begin with "report_", and it will have a ".zip" file extension on it.
-
- Posts: 113
- Joined: Wed Feb 12, 2020 3:18 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: USA
Re: Acorn won't run g code/mdi
That is what I meant to send...
- Attachments
-
- report_0479B7F04C20-0204202937_2024-04-20_14-19-04.zip
- (878.35 KiB) Downloaded 6 times
-
- Posts: 2278
- Joined: Fri May 24, 2019 8:34 am
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: 7804734C6498-0401191832
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: Clearwater, FL
Re: Acorn won't run g code/mdi
Have a look at your error log, it is littered with communication errors, this is why it wont run a file. You MUST fix this issue first before you can proceed. Read this document below, until you fix this issue nothing will work correctly. Did you run the com stress test? There's no way it would pass this test until the issue is corrected.
https://www.centroidcnc.com/dealersuppo ... ds/270.pdf
https://www.centroidcnc.com/dealersuppo ... ds/270.pdf
-
- Posts: 7439
- Joined: Wed Mar 03, 2010 4:23 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Contact:
Re: Acorn won't run g code/mdi
probably trying to command a G1 with an encoder installed
read up on G98 and G99 in the operator manual
but who knows i left my crystal ball at home.
read up on G98 and G99 in the operator manual
but who knows i left my crystal ball at home.
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
-
- Posts: 113
- Joined: Wed Feb 12, 2020 3:18 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: USA
Re: Acorn won't run g code/mdi < lathe G98/G99?>
I'm thankful...TRULY, for all the handholding. I wish I understood things better.. I took another, perfectly running Acorn PC and god the same results. Here's an image..I knows it a mess, but I'm trying to work with what I have...
-
- Posts: 113
- Joined: Wed Feb 12, 2020 3:18 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: USA
Re: Acorn won't run g code/mdi < lathe G98/G99?>
latest report... I really hope someday to be able to help someone else out....
- Attachments
-
- report_0479B7F04C20-0204202937_2024-05-04_13-09-14.zip
- (846 KiB) Downloaded 4 times
-
- Posts: 106
- Joined: Fri Jan 13, 2023 8:50 am
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: Hopewell NJ
- Contact:
Re: Acorn won't run g code/mdi < lathe G98/G99?>
Where is the ethernet cable?
-
- Posts: 113
- Joined: Wed Feb 12, 2020 3:18 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: USA
-
- Posts: 113
- Joined: Wed Feb 12, 2020 3:18 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: USA
Re: Acorn won't run g code/mdi < lathe G98/G99?>
The last 2 codes get movement, it doesn't like the g above it