I swear, I wired it up EXACTLY like the GS20 schematic says...yes, I know it's obsolete. It worked...kind of, by forcing(before I followed the schematics) the relays..it never worked with the VCP. Everything I seem to do turns to poison...
Re: GS2 VFD problem
Posted: Fri Apr 19, 2024 7:54 am
by Centroid_Tech2
The report shows that VFDEnable and VFDDirection outputs are forced off.
That was exactly the problem...thank you. NOW, while I can jog both axis and get the spindle running, it won't run any lines... I get a communications error IIRC.
Re: GS2 VFD problem
Posted: Sun Apr 21, 2024 3:04 pm
by pescadoman
And the encoder feedback for the spindle doesn't match the S command rpm...
Re: GS2 VFD problem
Posted: Mon Apr 22, 2024 3:18 pm
by cnckeith
pescadoman wrote: ↑Sun Apr 21, 2024 3:04 pm
And the encoder feedback for the spindle doesn't match the S command rpm...
you have to calibrate the vfd to match the commanded.