New install - CNC12 (resolved, follow the video)

All things related to the Centroid Acorn CNC Controller

Moderator: cnckeith

cnckeith
Posts: 7164
Joined: Wed Mar 03, 2010 4:23 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: Yes
CNC Control System Serial Number: none
DC3IOB: Yes
CNC11: Yes
CPU10 or CPU7: Yes
Contact:

Re: New install - CNC12

Post by cnckeith »

Please install TeamViewer as per Marty videos and private message me the ID and password out remote in and we'll see what's going on.
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
ScotY
Posts: 654
Joined: Sat Sep 23, 2017 7:57 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC11: No
CPU10 or CPU7: No
Location: Honolulu, HI

Re: New install - CNC12 (resolved)

Post by ScotY »

Okay, thanks. I'll do it on Thursday when I come home. About to go out of town again.
martyscncgarage
Posts: 9912
Joined: Tue Mar 28, 2017 12:01 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC12: Yes
CNC11: Yes
CPU10 or CPU7: Yes
Location: Mesa, AZ

Re: New install - CNC12 (resolved)

Post by martyscncgarage »

ScotY wrote: Mon Oct 02, 2017 4:33 pm Okay, thanks. I'll do it on Thursday when I come home. About to go out of town again.
Just remember to configure a permanent password and send that to Keith along with the ID.
If you don't set a permanent password, TeamViewer will cycle it as a security measure.
Reminder, for support please follow this post: viewtopic.php?f=20&t=383
We can't "SEE" what you see...
Mesa, AZ
ScotY
Posts: 654
Joined: Sat Sep 23, 2017 7:57 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC11: No
CPU10 or CPU7: No
Location: Honolulu, HI

Re: New install - CNC12 (resolved)

Post by ScotY »

Thanks, Marty. I appreciate all the help. Not sure why this is giving me problems. Seems like it shouldn't.
frijoli
Posts: 595
Joined: Tue Sep 12, 2017 10:03 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: 1030090099
DC3IOB: Yes
CNC12: Yes
CNC11: Yes
CPU10 or CPU7: No
Location: Outside Winston-Salem, NC
Contact:

Re: New install - CNC12 (resolved)

Post by frijoli »

What was the final solution?
Clay
near Winston-Salem, NC
unofficial ACORN fb group https://www.facebook.com/groups/897054597120437/
martyscncgarage
Posts: 9912
Joined: Tue Mar 28, 2017 12:01 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC12: Yes
CNC11: Yes
CPU10 or CPU7: Yes
Location: Mesa, AZ

Re: New install - CNC12 (resolved)

Post by martyscncgarage »

ScotY wrote: Mon Oct 02, 2017 8:35 pm Thanks, Marty. I appreciate all the help. Not sure why this is giving me problems. Seems like it shouldn't.
I think you will find that when you setup a dedicated PC, all will go much better. Laptops are hit and miss, so I have always avoided using them.
Reminder, for support please follow this post: viewtopic.php?f=20&t=383
We can't "SEE" what you see...
Mesa, AZ
cnckeith
Posts: 7164
Joined: Wed Mar 03, 2010 4:23 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: Yes
CNC Control System Serial Number: none
DC3IOB: Yes
CNC11: Yes
CPU10 or CPU7: Yes
Contact:

Re: New install - CNC12 (resolved)

Post by cnckeith »

frijoli wrote: Tue Oct 03, 2017 6:28 am What was the final solution?
please follow the instructions to prep windows 10 and install the Acorn CNC12 software.
http://www.centroidcnc.com/centroid_diy ... guide.html


i'm not sure what is plaguing scoty, i am waiting on him to send Teamviwer ID and password so I can remote in and find out whats going on and report back here.
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
ScotY
Posts: 654
Joined: Sat Sep 23, 2017 7:57 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC11: No
CPU10 or CPU7: No
Location: Honolulu, HI

Re: New install - CNC12

Post by ScotY »

I figured it out!!! I went and watched the videos again...nothing particularly stood out as to what I might have done wrong until I noticed the part where he unzipped the folder downloaded off the Centroid site. Windows 10 is confusing to me as it will kind of unzip folders and allow you to access the files within them, but it actually leaves the folder intact (unzipped), I believe that's what it does. So, I think the Wizard, and possibly CNC12, need access to files in that folder to run (or maybe it's just install) properly. Once I unzipped the folder and reinstalled the program, it all seems to be working! The Wizard program opens, the CNC12 main screen looks correct now, and the VCP seems to be working fine, as well.

Thanks, guys, for all your patience and help. Now that I have the program working, I can start learning more about how Acorn works. Then I will have a bunch of newbie questions, I am sure! :lol:
martyscncgarage
Posts: 9912
Joined: Tue Mar 28, 2017 12:01 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC12: Yes
CNC11: Yes
CPU10 or CPU7: Yes
Location: Mesa, AZ

Re: New install - CNC12

Post by martyscncgarage »

Yup.
Glad you have it up and running on the bench. If you are running on the mill, router watch Centroid mill training videos on YouTube. They are a little older but are still a great reference.
The Mill Operators manual is as well. Which you can download.

Marty
Reminder, for support please follow this post: viewtopic.php?f=20&t=383
We can't "SEE" what you see...
Mesa, AZ
ScotY
Posts: 654
Joined: Sat Sep 23, 2017 7:57 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC11: No
CPU10 or CPU7: No
Location: Honolulu, HI

Re: New install - CNC12 (resolved, follow the video)

Post by ScotY »

Thanks, Marty. I did watch that video...it's long, but a wealth of information. I edited the first post in this thread, just to add the things that caught me up so if anyone happens to have the same issues as me, they won't have to read the entire thread.
Post Reply