Page 3 of 8
Re: x-x+ jogging moves in the same direction in the x- direction
Posted: Wed Jan 25, 2023 7:21 pm
by mccue.sc
Re: x-x+ jogging moves in the same direction in the x- direction
Posted: Wed Jan 25, 2023 7:22 pm
by mccue.sc
sorry for the screen shots snip wasn't working
Re: x-x+ jogging moves in the same direction in the x- direction
Posted: Wed Jan 25, 2023 7:30 pm
by mccue.sc
got the boar from centroid website
Re: x-x+ jogging moves in the same direction in the x- direction
Posted: Wed Jan 25, 2023 7:39 pm
by cnckeith
thanks, i have that info from the report.zip
what i was asking for is screen shots from the clearpath software setup screen for each axis.
use the windows snipping tool. ,type 'snip" in the windows search to find it
Re: x-x+ jogging moves in the same direction in the x- direction
Posted: Wed Jan 25, 2023 8:59 pm
by martyscncgarage
First, make sure your wiring is OK. Then move X over to the 4th axis on Acorn and assign the 4th axis in the Wizard to X and see if your axis starts behaving.
Re: x-x+ jogging moves in the same direction in the x- direction
Posted: Wed Jan 25, 2023 9:00 pm
by martyscncgarage
When did you buy the board?
Re: x-x+ jogging moves in the same direction in the x- direction
Posted: Wed Jan 25, 2023 9:41 pm
by mccue.sc
moved x wiring over to 4th axis would not allow me to name it x but called it a axis and it works as should looks like I have lost x axis or #1 axis do you happen to know if I can change anything else to get it to read x and not a
for now it will only be a 3 axis mill?
Re: x-x+ jogging moves in the same direction in the x- direction
Posted: Wed Jan 25, 2023 10:03 pm
by martyscncgarage
mccue.sc wrote: ↑Wed Jan 25, 2023 9:41 pm
moved x wiring over to 4th axis would not allow me to name it x but called it a axis and it works as should looks like I have lost x axis or #1 axis do you happen to know if I can change anything else to get it to read x and not a
for now it will only be a 3 axis mill?
Did you change it from a rotary axis to a linear axis?
Re: x-x+ jogging moves in the same direction in the x- direction
Posted: Thu Jan 26, 2023 6:24 am
by mccue.sc
yes
Re: x-x+ jogging moves in the same direction in the x- direction
Posted: Thu Jan 26, 2023 10:40 am
by mikeintx
Possibly one of the cables got nicked/cut when running them through the bulkhead and is now shorting out somehow? Just a wild guess but these things happen.